Please make sure your case is the correct size before attempting to install. Please follow directions carefully. We are not responsible for broken cases that have been installed incorrectly. Make note of the tab locations.
DO NOT push the case down all at once. This can cause the tabs to break. Follow the tips below to ensure you properly install the case.
1. Hook the bottom of the back part of case to computer first. Line up edges so they are equal on both the left and right sides.
2. Before pressing down, take caution that everything is lined up. Gently snap case on front edges of the bottom, one corner/tab at a time.
3. Hook the bottom of the top part of case to computer first. Line up edges so they are equal on both the left and right sides and lay the case gently over the computer.
4. Again before pressing down, take caution that everything is lined up. Gently snap case on top edges, one corner/tab at a time.
Please take care when putting your case in and out of bags, backpacks, etc. While the wood is durable, it is a natural product and is subject to scratching.
While the hard shell will prevent damage to your computer, we recommend avoiding situations where your MacBook may fall to the ground.
The wood is finished with a Danish Oil (Polymerized Linseed Oil). While this finish is durable and long lasting, wood is living and may require refinishing every once in a while. If the wood looks dry, we recommend applying a very small amount of wood oil to restore its beauty.